Definition of concrete
Concrete is a kind of cementitious material which is composed of cementitious materials, coarse and fine aggregates and water in a certain proportion, tamping and curing. Generally speaking, it refers to cement concrete.
Commercial concrete refers to the concrete mixture which is mixed by cement, aggregate, water, admixtures, mineral admixtures and other components in a certain proportion, sold in the mixing plant after metering and mixing, and transported to the place of use by transport vehicles within the specified time.
Concrete composition
Cementitious materials, coarse and fine aggregates, water and additives or admixtures shall be added as necessary.
(1) Cementitious material: its function is to bond loose aggregate into a whole, such as cement, gypsum, asphalt, etc.
(2) Coarse and fine aggregate: mainly used as skeleton to bear external force, coarse aggregate such as gravel, pebble, gravel, etc. Fine aggregate, such as river sand, sea sand, mountain sand and artificial sand.
(3) Water: generally tap water, which must comply with the water standard for concrete mixing (jgj63).
(4) Admixtures and admixtures: mainly used to improve the performance of concrete and save materials, such as water reducing agent, retarder, expansion agent, etc. Fly ash, slag, silica fume and other additives.
Classification of concrete
Generally, it can be divided into two types: ordinary concrete and special concrete.
Various properties of concrete
(1) Workability: it is an important index of concrete construction performance, generally expressed by slump or workability.
(2) Slump: refers to the value of concrete free slump under a certain test method. Slump, as an index of commercial concrete fluidity, large slump means great fluidity, which requires high slump of pumping concrete. The slump is generally measured in mm, accurate to 5mm. The slump of concrete produced by the company is generally 80 ~ 220mm. The fluidity concrete refers to the concrete with slump of 100 ~ 150 mm, and the high fluidity concrete refers to the concrete with slump ≥ 160mm
(3) Bleeding: refers to the nature of water separated from commercial concrete during transportation and pouring. A large amount of bleeding concrete mixture will have adverse effects on the quality of concrete, resulting in the reduction of concrete strength.
(4) Water retention: compared with bleeding, good water retention leads to poor bleeding.
(5) Layered segregation: refers to the separation of components of concrete mixture during transportation and pouring. For commercial concrete with serious delamination, coarse aggregate settlement and cement mortar floating often occur in the mixture, which will affect the uniformity of concrete and reduce the strength of concrete.
(6) Cohesion: the opposite of isolation.
(7) Strength: divided into compressive strength, tensile strength and flexural strength. The compressive strength is the main index of concrete strength, the unit is MPa. The strength grade is indicated by the symbol C and the standard value. The grade can be divided into C10,... C30, C35 C60, etc. High strength concrete refers to the concrete with strength grade ≥ C60, and pumping concrete refers to the pumping construction concrete with slump no less than 100 mm.
(8) Impermeability: the resistance of concrete to liquid pressure such as water and oil. The impermeability is indicated by the impermeability label, which is divided into P6, P8, P10 and p12 (indicating the maximum water pressure when 4 out of 6 specimens in each group have no water seepage).
The above is the whole content of this article, if you want to know more about it, you can pay attention to us.




