Mar 03, 2026 Leave a message

The benefits of using curved mixing arms in a double horizontal shaft mixer

At the 2025 exhibition, a new concept was proposed for the double horizontal axis mixing host mixing arm - the curved mixing arm. Analysis shows that the curved mixing arm has the following advantages:

1. Optimize material flow

Forming a good material flow cycle: When the arc-shaped mixing arm rotates, it can guide the material to flow along a specific arc-shaped trajectory, making the material form a more orderly and smooth circulation flow in the mixing drum, reducing the accumulation and stagnation of materials, and allowing the materials to mix and exchange positions more fully during the mixing process.

Enhance material flipping effect: Compared to straight arm stirring arms, curved stirring arms can be inserted into materials at different angles and depths during rotation, like a spoon, more forcefully flipping up materials at the bottom and edges, allowing materials to be flipped more fully in both vertical and horizontal directions, avoiding mixing dead corners.

2. Improve mixing efficiency

Reduce mixing resistance: The arc-shaped design makes the contact area and angle between the mixing arm and the material more reasonable when moving in the material, reducing the resistance during the mixing process, lowering the load on the motor, making the mixing process easier and smoother, thereby increasing the mixing speed and shortening the mixing time.

Improving energy transfer efficiency: The curved stirring arm can more effectively transfer the power of the motor to the material, allowing the material to obtain greater kinetic energy and achieve uniform mixing more quickly, thereby improving energy utilization efficiency and achieving better stirring results with the same energy consumption.

3. Reduce equipment wear and tear

Reduce the impact on the lining plate: During the mixing process, the arc-shaped mixing arm has a relatively small impact on the lining plate on the inner wall of the mixing drum, which can reduce the wear of the lining plate, extend the service life of the lining plate, and reduce the maintenance cost and downtime of the equipment.

Reduce self wear rate: Due to the softer contact and interaction between the curved stirring arm and the material, the self wear is relatively small, especially when stirring materials with high hardness or strong corrosiveness. The wear resistance advantage of the curved stirring arm is more obvious, which can extend the replacement cycle of the stirring arm.

4. Improve mixing quality

Realize more uniform mixing: By optimizing material flow and improving mixing efficiency, the curved mixing arm can achieve a more uniform mixing state of materials with different compositions and properties in a shorter time, improving the stability and consistency of mixing quality.

Improving material mixing efficiency: For processes that require precise control of mixing degree and uniformity, such as concrete mixing, chemical raw material mixing, etc., curved mixing arms can better meet the process requirements and ensure product quality meets standards.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry